Health & Medicine

Home > Product > Dental Handpiece

Tealth External Irrigation Low Speed Air Motor Dental Handpiece

Tealth Foshan Medical Equipment Co., Ltd.
  • Condition：New
  • Certification：TUV, ISO, CE
  • Material：Aluminum
  • Light Way：Without Light
  • Water Way：Outer Channel
  • Usage Times：Non-Disposable

Base Info

  • Model NO.：BEN-02C
  • Application：Adult, Child
  • Loading Way：Gland Type
  • Head Diameter：Middle Head
  • Exhaust Way：Exhaust Outside
  • Number of Holes：Two Holes
  • Connection：Without Quick Connector
  • Rotating Speed：Low-Speed Handpiece
  • Noise：Less Than 70dB
  • Water Irrigation：External Irrigation
  • Transport Package：Plastic Box
  • Specification：Aluminum, stainless steel
  • Trademark：TEALTH
  • Origin：China
  • HS Code：90184100
  • Production Capacity：50000PCS,Year

Description

Basic Info.

Model NO. BEN-02C Application Adult, Child Loading Way Gland Type Head Diameter Middle Head Exhaust Way Exhaust Outside Number of Holes Two Holes Connection Without Quick Connector Rotating Speed Low-Speed Handpiece Noise Less Than 70dB Water Irrigation External Irrigation Transport Package Plastic Box Specification Aluminum, stainless steel Trademark TEALTH Origin China HS Code 90184100 Production Capacity 50000PCS/Year

Product Description

Product Name: Tealth External soray air motor 2 holes dental handpiece
Model:BEN-02C
Tealth External Irrigation Low Speed Air Motor Dental Handpiece
Pack list :
1.Air motor *1 pcs
2.Spare O ring * 1 pcs
3 Black box / Transparent box  * 1 pcs
Tealth External Irrigation Low Speed Air Motor Dental HandpieceParameters:

1.Ratio: E-type Low Speed Handpiece 1:1 Ratio, with external water Cooling System3. Air Pressure: 245-392Kpa (2.5-4.0 kgf/cm²)4. Water Pressure: 200Kpa (2kg)5. Rotation Speed: 14,000-20,000 rpm6. Chuck Type: Press button7. Bur Applicable: Φ2.334-2.355mm (CA BUR CONTRA ANGLE & HP BUR STRAIGHT CONE) 8. Noise: ≤70dB
9.Fit with E type air motor,  2 holes connector
10.Conform to ISO 13485 standard

After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.

Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.